Site Sponsors |
|
Patron Membership |
|
Board Menu |
|
|
 |
|

01-13-2021, 04:25 AM
|
 |
|
|
Join Date: Jun 2007
Location: Guilford, IN
Posts: 724
|
|
Re: Bareboat draw weights?
“Normally, I have a 10 yard span across a target.“
Hank, I’m not sure what you mean by “span across target.”
|

01-13-2021, 06:39 AM
|
 |
|
|
Join Date: Mar 2009
Location: southern ia
Posts: 11,770
|
|
Re: Bareboat draw weights?
TOm I think he means if he aims at center mass it's 10 yards from missing over top to shooting under it.
__________________
Steve Long
"Fortunately, ah keep mah feathers numbered, for just such an emergency"
beware the archer with only one signature line.
|

01-13-2021, 07:21 AM
|
Haybale Hunter
|
|
Join Date: Apr 2020
Location: On the farm
3D Bow: Hoyt Satori
Outdoor Target Bow: Hoyt Satori - Bickerstaffe long bow
Posts: 212
|
|
Re: Bareboat draw weights?
Like each half of the target represents 5 yards. Of course, as you get further back, the target gets smaller so you would get less of an effect.
|

01-13-2021, 05:04 PM
|
|
|
Join Date: Mar 2015
Location: fox lake il
Posts: 20
|
|
Re: Bareboat draw weights?
I shoot 45# +/- a few pounds, have about 13 bows and they all differ a bit.
|

01-13-2021, 06:43 PM
|
 |
Civil but Disobedient
|
|
Join Date: Feb 2009
Location: Southern California
Outdoor Target Bow: Bernardini Luxor with Border HEX6 limbs
Posts: 10,390
|
|
Re: Bareboat draw weights?
Quote:
Originally Posted by 2Ten
“Normally, I have a 10 yard span across a target.“
Hank, I’m not sure what you mean by “span across target.”
|
What I mean is that moving my arrow point from the center to the top of the target face is a 5 yard increase in distance. Moving it to the bottom is a 5 yard decrease. This works most the time since the targets get bigger as the shot gets longer. NFAA field has some interesting overlaps though, where you shoot multiple sized targets for the same distance. For these, I visualize the target size that is most common for the distance.
__________________
USA Archery, NFAA
El Dorado Archers, Oranco Bowmen, Mojave Archers
|

01-14-2021, 01:20 AM
|
 |
|
|
Join Date: Mar 2005
Location: Tallinn, Estonia
Posts: 4,902
|
|
Re: Bareboat draw weights?
WA3D most were in that 40# range, Swedish archer Fredrik Lundmark was 52# but he has a +31" draw length.
In WA3D worlds in France myself Fredrik and an Italian had a shoot off to make the 8 cut, it was a 30m shot and many of the spectators were to the side, afterwards a Russian archer said my arrow was very flat trajectory compared to the others, I was 40# OTF, considering Fredrik's setup I was quite surprised.
My setup was Vanquish riser, 42# Kaya K7's and 3DHV arrows. These arrows are very light and can be twitchy if my form is off but that week was a good week for me and I was very happy with my Form/Release, just one bad moment during semi finals were I just couldn't find my grove but found it again during finals.
Draw weight is important only in respect of physical control i.e. 52# would never work for me, a well tuned and forgiving setup really is key to barebow success in my opinion. Barebow is interesting because some great archers have made their setups a success in so many different ways that there is no set in stone solution, it all adds to the fascination of Barebow.
|
The Following 4 Users Say Thank You to steve morley For This Useful Post:
|
|

01-14-2021, 09:23 AM
|
|
|
Join Date: Oct 2011
Location: Victoria, BC, Canada
Posts: 6,258
|
|
Re: Bareboat draw weights?
I had a pretty fast setup that took fairly large vanes to be forgiving (70mm kurly) which totally fell apart once beyond WA3D distances especially if there was any wind.
Super light arrows with feathers can be like that too.
I have a theory that higher draw weights don't feel as difficult if they are spread over a longer draw length. As someone with a modest draw length I've struggled to really control higher draw weights so I've always focused on reducing arrow weight which has some real disadvantages.
__________________
Archery is a process that ends with a result. Once you start to focus on the result (where the shot goes, how big the group is, what your score is, what place you are in) then you loose the capacity to focus on the process.
|
The Following 3 Users Say Thank You to Grantmac For This Useful Post:
|
|

01-14-2021, 11:23 AM
|
|
|
Join Date: Mar 2019
Posts: 1
|
|
Re: Bareboat draw weights?
I like shooting between #35 and #40. My rig is currently at #39 which puts my point-on at about 48yds. (Gillo G1, Uukha VX1000, VAP's). This is a great middle ground for Field shooting... Crawls aren't too big for close work and not too many "reverse gapping" calculations for anything further. I could lower my anchor by a finger for a further PO but I'm comfy as is.
|

01-14-2021, 11:47 AM
|
 |
|
|
Join Date: Mar 2005
Location: Tallinn, Estonia
Posts: 4,902
|
|
Re: Bareboat draw weights?
Quote:
Originally Posted by Grantmac
As someone with a modest draw length I've struggled to really control higher draw weights so I've always focused on reducing arrow weight which has some real disadvantages.
|
The Vanquish had a slight aggressive geometry and the K7's were shorts, light 3DHV's and my short draw gave me a pretty fast setup. My off days could be bad where I struggled with grouping but I just worked harder on my release and cut down those off days, I did feel I was right on the edge of what's considered a stable setup but it worked for me.
The Gillo GT riser feels very soft in comparison, still fun but very different. Wish I could still draw 40#, even 28# is now becoming a struggle.
|
The Following 3 Users Say Thank You to steve morley For This Useful Post:
|
|

01-14-2021, 02:05 PM
|
|
|
Join Date: Oct 2011
Location: Victoria, BC, Canada
Posts: 6,258
|
|
Re: Bareboat draw weights?
I'd like to try short limbs on a 27" riser one of these days.
Currently trying some medium Hex6.5 on a 27" at max preload and they are shooting really well. Noticeably different to a 25".
That extra bit of BH and overall length is quite noticeable.
__________________
Archery is a process that ends with a result. Once you start to focus on the result (where the shot goes, how big the group is, what your score is, what place you are in) then you loose the capacity to focus on the process.
|

01-14-2021, 07:36 PM
|
 |
|
|
Join Date: May 2011
Location: woolgoolga australia
Posts: 76
|
|
Re: Bareboat draw weights?
Quote:
Originally Posted by Rhys
I shoot 45# +/- a few pounds, have about 13 bows and they all differ a bit.
|
Only one competition bow here.
For 3d, WA Field, target and indoor
23"CXT 32#EX Powers - short draw archer- gives about 26# otf
60/900 round requires split fingers for the 60m, otherwise stringwalk.
Our 3d in Australia follows IBO unknown(RU) so 30yd/27.4m max.
|

01-22-2021, 12:41 PM
|
 |
|
|
Join Date: Jan 2021
Location: Iowa
Posts: 1
|
|
Re: Bareboat draw weights?
30# all around
|
 |
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|