TradTalk Forums - View Single Post - Hoyt Spectra Lite Hunter
View Single Post
Old 09-16-2020, 08:30 AM
JRT51 JRT51 is offline
Join Date: Mar 2019
Posts: 26
Default Re: Hoyt Spectra Lite Hunter

I warfed a Spectra Lite recently and the only thing that never meshed with me was the grip , too narrow. Glen's plates (Hawkeye mfg) are the way to go and you might consider the bushings and bolt washers as well. I packed those voids in the limb pockets flush with epoxy putty and let the plates float on a thin pad of dense plastic and it made for a very quiet riser.

Last edited by JRT51; 09-16-2020 at 11:44 AM.
Reply With Quote